ВЫХОДНОЙ ВАЛ ПОВТОРНАЯ СБОРКА

PROCEDURE


  1. INSTALL 3RD GEAR NEEDLE ROLLER BEARING


    1. A01XH96

      Coat the needle roller bearing with gear oil and install it to the output shaft.

  2. INSTALL 3RD GEAR


    1. A01XFHI

      Coat the 3rd gear with gear oil and install it to the output shaft.

  3. INSTALL NO. 1 SYNCHRONIZER RING


    1. A01XEP4

      Coat the No. 1 synchronizer ring with gear oil and install it to the 3rd gear.

  4. INSTALL NO. 2 TRANSMISSION CLUTCH HUB


    1. A01XHOJ

      Coat the hub sleeve with gear oil and install it to the clutch hub.

      Text in Illustration
      B001CHY Front

      Note

      Be sure to install the hub sleeve to the clutch hub in the correct direction.

    2. A01XLWM

      Install the 3 synchromesh shifting keys to the clutch hub with the 2 synchromesh shifting key springs.

      Note

      Do not set both openings of the shifting key springs in the same position.

    3. A01XJPGE01

      Using SST and a press, install the No. 2 clutch hub to the output shaft.

      SST
      09316-60011   ( 09316-00021 )
    4. A01XCXK

      Select a clutch hub shaft snap ring that will allow minimal axial play.

      Standard clearance
      0.10 mm (0.00394 in.) or less
      Standard Clutch Hub Shaft Snap Ring
      Mark Thickness
      C-1 1.75 to 1.80 mm (0.0689 to 0.0709 in.)
      D 1.80 to 1.85 mm (0.0709 to 0.0728 in.)
      D-1 1.85 to 1.90 mm (0.0728 to 0.0748 in.)
      E 1.90 to 1.95 mm (0.0748 to 0.0768 in.)
      E-1 1.95 to 2.00 mm (0.0768 to 0.0787 in.)
      F 2.00 to 2.05 mm (0.0787 to 0.0807 in.)
      F-1 2.05 to 2.10 mm (0.0807 to 0.0827 in.)
    5. A01XHHG

      Using a snap ring expander, install the snap ring.

  5. INSPECT 3RD GEAR THRUST CLEARANCE

    Click here

  6. INSTALL 2ND GEAR NEEDLE ROLLER BEARING


    1. A01XCBJ

      Coat the needle roller bearing with gear oil and install it to the output shaft.

  7. INSTALL 2ND GEAR


    1. A01XGA2

      Coat the 2nd gear with gear oil and install it to the output shaft.

  8. INSTALL NO. 2 SYNCHRONIZER RING (for 2nd Gear)


    1. A01XCTD

      Coat the No. 2 synchronizer ring with gear oil and install it to the 2nd gear.

  9. INSTALL NO. 1 TRANSMISSION CLUTCH HUB


    1. A01XM3T

      Coat the reverse gear with gear oil and install it to the clutch hub.

      Text in Illustration
      B001CHY Front

      Note

      Be sure to install the reverse gear to the clutch hub in the correct direction.

    2. A01XLWM

      Install the 3 synchromesh shifting keys to the clutch hub with the 2 synchromesh shifting key springs.

      Note

      Do not set both openings of the shifting key springs in the same position.

    3. A01XHXCE01

      Using SST and a press, install the clutch hub to the output shaft.

      SST
      09316-60011

  10. INSTALL NO. 1 SYNCHRONIZER RING (for 1st Gear)


    1. A01XKF7

      Coat the synchronizer ring with gear oil and install it to the No. 1 clutch hub.

  11. INSTALL 1ST GEAR BEARING INNER RACE LOCK BALL


    1. A01XG1N

      Coat the lock ball with gear oil and install it to the output shaft.

  12. INSTALL 1ST GEAR BEARING INNER RACE


    1. A01XKN2E03
      Text in Illustration
      *1 1st Gear Bearing Inner Race
      *2 1st Gear Needle Roller Bearing
      *3 1st Gear

      Coat the needle roller bearing with gear oil.

    2. Install the inner race and needle roller bearing to the 1st gear.

  13. INSTALL 1ST GEAR


    1. A01XM0R

      Coat the 1st gear with gear oil and install it to the output shaft.

  14. INSTALL OUTPUT SHAFT CENTER BEARING


    1. A01XIDDE01

      Using SST and a press, install the center bearing to the output shaft.

      SST
      09316-60011   ( 09316-00021 )

  15. INSPECT 1ST GEAR THRUST CLEARANCE

    Click here

  16. INSTALL 5TH GEAR


    1. A01XEXPE01

      Using SST and a press, install the 5th gear to the output shaft.

      SST
      09316-60011   ( 09316-00021 )
    2. A01XG0B

      Select a snap ring that will allow minimal axial play.

      Standard clearance
      0.10 mm (0.00394 in.) or less
      Standard Output Shaft Bearing Shaft Snap Ring
      Mark Thickness
      A 2.67 to 2.72 mm (0.1052 to 0.1070 in.)
      B 2.73 to 2.78 mm (0.1075 to 0.1094 in.)
      C 2.79 to 2.84 mm (0.1099 to 0.1118 in.)
      D 2.85 to 2.90 mm (0.1123 to 0.1141 in.)
      E 2.91 to 2.96 mm (0.1146 to 0.1165 in.)
      F 2.97 to 3.02 mm (0.1170 to 0.1188 in.)
      G 3.03 to 3.08 mm (0.1193 to 0.1212 in.)
      H 3.09 to 3.14 mm (0.1217 to 0.1236 in.)
      J 3.15 to 3.20 mm (0.1241 to 0.1259 in.)
      K 3.21 to 3.26 mm (0.1264 to 0.1283 in.)
      L 3.27 to 3.32 mm (0.1288 to 0.1307 in.)
    3. A01XF7O

      Using a brass bar and hammer, tap on the snap ring.

  17. INSPECT 5TH GEAR THRUST CLEARANCE

    Click here

  18. INSPECT 3RD GEAR THRUST CLEARANCE

    Click here

  19. INSPECT 2ND GEAR THRUST CLEARANCE

    Click here

  20. INSPECT 1ST GEAR THRUST CLEARANCE

    Click here

  21. INSPECT 3RD GEAR RADIAL CLEARANCE

    Click here

  22. INSPECT 2ND GEAR RADIAL CLEARANCE

    Click here

  23. INSPECT 1ST GEAR RADIAL CLEARANCE

    Click here