МЕХАНИЧЕСКАЯ ТРАНСМИССИЯ В СБОРЕ УСТАНОВКА

PROCEDURE


  1. INSTALL TRANSFER ASSEMBLY

    Click here

  2. INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY


    1. Align the input shaft with the clutch disc and install the transmission to the engine.

    2. Install the 4 bolts.

      Torque:
      72 N*m  { 730 kgf*cm, 52 ft.*lbf }

  3. INSTALL STIFFENER PLATE LH


    1. B001DD2E02

      Install the stiffener plate with the 4 bolts.

      Torque:
      for bolt A
      37 N*m  { 380 kgf*cm, 27 ft.*lbf }
      for bolt B
      69 N*m  { 701 kgf*cm, 50 ft.*lbf }

  4. INSTALL STIFFENER PLATE RH


    1. B001EBDE02

      Install the stiffener plate with the 4 bolts.

      Torque:
      for bolt A
      37 N*m  { 380 kgf*cm, 27 ft.*lbf }
      for bolt B
      69 N*m  { 701 kgf*cm, 50 ft.*lbf }

  5. INSTALL REAR NO. 1 ENGINE MOUNTING INSULATOR


    1. Install the mounting insulator with the 4 bolts.

      Torque:
      73 N*m  { 739 kgf*cm, 54 ft.*lbf }

  6. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    1. Install the frame crossmember with the 4 bolts and 4 nuts.

      Torque:
      72 N*m  { 734 kgf*cm, 53 ft.*lbf }

    2. Install the 4 bolts to the rear No. 1 engine mounting insulator.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  7. INSTALL FRONT SUSPENSION MEMBER BRACKET LH


    1. Install the member bracket with the 4 bolts.

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

  8. INSTALL FRONT SUSPENSION MEMBER BRACKET RH


    1. Install the member bracket with the 4 bolts.

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

  9. INSTALL STARTER ASSEMBLY


    1. Install the starter Click here.

  10. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY


    1. Connect the release cylinder with the 2 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  11. INSTALL TRANSFER AND MANUAL TRANSMISSION BREATHER HOSE SUB-ASSEMBLY


    1. Install the 3 breather hoses to the shift lever retainer and transfer adapter and attach the clamp.

  12. CONNECT WIRE HARNESS


    1. Connect the 2 connectors and attach the 4 clamps.

  13. INSTALL PROPELLER SHAFT ASSEMBLY


    1. Install the propeller shaft Click here.

  14. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


    1. Install the front propeller shaft Click here.

  15. INSTALL FRONT EXHAUST PIPE ASSEMBLY


    1. Install the front exhaust pipe Click here.

  16. ADD MANUAL TRANSMISSION OIL

  17. INSTALL TRANSFER CASE LOWER PROTECTOR


    1. Install the transfer case lower protector with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  18. INSTALL SHIFT LEVER ASSEMBLY


    1. B001HW4

      Apply MP grease to the tip of the shift lever assembly.

      Text in Illustration
      B001CHY MP Grease

    2. Cover the shift lever cap with a cloth.

    3. B001CQRE02
      Text in Illustration
      *1 Shift Lever Cap
      *a Press down
      *b Clockwise
      *c Lock

      While pressing down on the shift lever cap, turn it clockwise to install the shift lever assembly.

  19. INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT


    1. Install the boot with the 4 screws and 2 clips.

  20. INSTALL CENTER FLOOR CARPET ASSEMBLY (for Bench Seat Type)


    1. Install the center floor carpet assembly with the 4 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 61 in.*lbf }

  21. INSTALL FRONT SEAT ASSEMBLY (for Bench Seat Type)

    Click here

  22. INSTALL CONSOLE BOX (for Bench Seat Type)

    Click here

  23. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Separate Type)

    for Manual Transmission: Click here

    w/ Refrigerated Cool Box: Click here

  24. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

  25. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.