ВЫКЛЮЧАТЕЛЬ СВЕТА ЗАДНЕГО ХОДА ПРОВЕРКА

PROCEDURE


  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY


    1. A01XH40E01
      Text in Illustration
      *A for 1GR-FE
      *B except 1GR-FE
      *a Pushed
      *b Released

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Released 10 kΩ or higher

      • If the result is not as specified, replace the back-up light switch assembly.