СИСТЕМА МЕХАНИЧЕСКОЙ ТРАНСМИССИИ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE


  1. CHECK TRANSMISSION OIL

    B001D8PE73
    *1 0 to 5.0 mm

    1. Park the vehicle on a level surface.

    2. Remove the transmission filler plug and gasket.

    3. Check that the oil level is within 5 mm (0.196 in.) of the lowest point of the transmission filler plug opening.

      If the result is not as specified, add transmission oil.

      Oil Grade
      Toyota Genuine Transfer Gear oil LF or equivalent
      Viscosity
      SAE 75W
      Standard capacity
      2.1 liters (2.2 US qts, 1.8 Imp. qts)

      Note


      • Too much or too little oil will lead to transmission problems.

      • After adjusting the oil level, drive the vehicle and check the oil level again.

    4. Inspect for oil leaks when the oil level is low.

    5. Install a new gasket and the transmission filler plug.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }