КОНТАКТНЫЙ ДАТЧИК ДАВЛЕНИЯ МАСЛА УСТАНОВКА

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Clean the threads of the oil pressure switch and apply adhesive to them.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note

      Do not apply adhesive to the oil inlet port of the oil pressure switch.

   2. Using a 24 mm deep socket wrench, install the oil pressure switch.

      Torque:

      15 N*m  { 150 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine within 1 hour of installation.

2. INSTALL VACUUM PUMP OIL INLET HOSE

   Click here

3. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

   Click here

4. INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

   Click here

5. INSPECT FOR ENGINE OIL LEAK

   Click here