МАСЛЯНЫЙ РАДИАТОР ДВИГАТЕЛЯ УСТАНОВКА

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install 2 new gaskets and the oil cooler to the filter bracket with the 4 nuts.

      Torque:

      16 N*m  { 158 kgf*cm, 11 ft.*lbf }

2. INSTALL OIL FILTER BRACKET SUB-ASSEMBLY

   
   
   1. 

      Text in Illustration

      *1

      Nut

      Install a new gasket and the oil filter bracket with the 10 bolts and 2 nuts.

      Torque:

      30 N*m  { 301 kgf*cm, 22 ft.*lbf }

3. INSTALL OIL FILTER SUB-ASSEMBLY

   Click here

4. CONNECT VACUUM PUMP OIL INLET HOSE

   
   

   1. 

      Connect the vacuum pump oil inlet hose with a new gasket and the union bolt.

      Torque:

      14 N*m  { 140 kgf*cm, 10 ft.*lbf }

      Tech Tips

      When tightening the inlet hose, hang the stopper-bar of the inlet hose on the filter bracket to prevent the inlet hose from rotating.

      Text in Illustration

      *1	Stopper-bar

5. INSTALL EXHAUST MANIFOLD

   
   

   1. Install the exhaust manifold Click here.

6. INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the generator Click here.

7. ADD ENGINE OIL

   Click here

8. ADD ENGINE COOLANT

   Click here

9. INSPECT FOR ENGINE OIL LEAK

   Click here

10. INSPECT FOR ENGINE COOLANT LEAK

    Click here

11. INSPECT FOR EXHAUST GAS LEAK

    Click here