МАСЛЯНЫЙ РАДИАТОР ДВИГАТЕЛЯ СНЯТИЕ

PROCEDURE


  1. REMOVE GENERATOR ASSEMBLY


    1. Remove the generator Click here.

  2. REMOVE EXHAUST MANIFOLD


    1. Remove the exhaust manifold Click here.

  3. DRAIN ENGINE COOLANT

    Click here

  4. DRAIN ENGINE OIL

    Click here

  5. DISCONNECT OIL FILTER SUB-ASSEMBLY

    Click here

  6. DISCONNECT VACUUM PUMP OIL INLET HOSE


    1. A01XM9G

      Remove the union bolt and gasket, and then disconnect the vacuum pump oil inlet hose from the cylinder block.

  7. REMOVE OIL FILTER BRACKET SUB-ASSEMBLY


    1. A01XEGN

      Remove the 10 bolts, 2 nuts, oil filter bracket and gasket.

  8. REMOVE OIL COOLER ASSEMBLY


    1. Remove the 4 nuts, oil cooler and 2 gaskets.