ВЫПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  2. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

    Click here

  3. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A01XEDO

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A01XLWX

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  4. REMOVE INTAKE PIPE

    Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  6. REMOVE ENGINE OIL LEVEL DIPSTICK


    1. Remove the oil level dipstick.

  7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the 2 bolts, guide and O-ring.

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01XFP9

      Remove the 3 bolts and insulator.

  9. REMOVE EXHAUST MANIFOLD


    1. A01XE1B

      Remove the 2 nuts, 6 bolts and manifold.

    2. Remove the gasket.