УЗЕЛ ТОПЛИВНОГО БАКА УСТАНОВКА

PROCEDURE

1. INSTALL FUEL TANK BREATHER HOSE

   
   

   1. Install the fuel tank breather hose to the fuel sub tank.

2. INSTALL FUEL TANK TO FILLER PIPE HOSE

   
   

   1. Install the fuel tank to filler pipe hose to the fuel sub tank.

3. INSTALL FUEL TANK VENT TUBE ASSEMBLY

   
   

   1. Install a new gasket and fuel tank vent tube with the 8 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

   2. Attach the wire harness clamp.

4. INSTALL FUEL SUB TANK SUB-ASSEMBLY

   
   

   1. Set the fuel sub tank on a transmission jack and lift up the transmission jack.

   2. Connect the 2 fuel tank bands with the 4 bolts.

      Torque:

      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   3. Connect the fuel sender gauge connector.

5. CONNECT FUEL TANK BREATHER HOSE

   
   

   1. Connect the fuel tank breather hose to the filler pipe.

6. CONNECT FUEL TANK TO FILLER PIPE HOSE

   
   

   1. Connect the fuel tank to filler pipe hose to the filler pipe.

7. CONNECT FUEL HOSE

   
   

   1. Connect the fuel evaporation hose, fuel breather hose and 2 fuel hoses.

8. INSTALL NO. 2 FUEL TANK PROTECTOR

   
   

   1. Install the No. 2 fuel tank protector with the 5 bolts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

10. BLEED AIR FROM FUEL SYSTEM

    Click here

11. INSPECT FOR FUEL LEAK

    Click here