БЛОК ДВИГАТЕЛЯ СНЯТИЕ

PROCEDURE


  1. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET


    1. A01XD0H

      Remove the 4 bolts and compressor mounting bracket.

  2. REMOVE CRANKSHAFT PULLEY

    Click here

  3. REMOVE TIMING BELT COVER

    Click here

  4. SET NO. 1 CYLINDER TO TDC/COMPRESSION

    Click here

  5. REMOVE TIMING BELT

    Click here

  6. REMOVE CRANKSHAFT TIMING PULLEY

    Click here

  7. REMOVE INTAKE FLANGE

    Click here

  8. REMOVE DIESEL THROTTLE BODY

    Click here

  9. REMOVE INJECTION PIPE SET

    Click here

  10. REMOVE NO. 1 GLOW PLUG CONNECTOR

    Click here

  11. REMOVE NOZZLE LEAKAGE PIPE ASSEMBLY

    Click here

  12. REMOVE NOZZLE HOLDER & NOZZLE SET

    Click here

  13. REMOVE GLOW PLUG ASSEMBLY

    Click here

  14. REMOVE INJECTION PUMP DRIVE PULLEY

    Click here

  15. REMOVE INJECTION PUMP ASSEMBLY

    Click here

  16. REMOVE CRANK POSITION SENSOR

    Click here

  17. REMOVE WATER OUTLET HOUSING


    1. A01XF3C

      Remove the 3 bolts, outlet housing and gasket.

  18. REMOVE INTAKE MANIFOLD


    1. A01XG38

      Remove the 6 bolts, 2 nuts, intake manifold and gasket.

  19. REMOVE WATER BY-PASS HOSE UNION


    1. Remove the water by-pass hose union.

  20. REMOVE NO. 1 GENERATOR BRACKET


    1. A01XFI0

      Remove the 3 bolts and No. 1 generator bracket.

  21. REMOVE PUMP BRACKET


    1. A01XJ8Q

      Remove the 3 bolts and pump bracket.

  22. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the dipstick.

    2. A01XGZ8

      Remove the 2 bolts and dipstick guide.

    3. Remove the O-ring from the dipstick guide.

  23. REMOVE NO. 1 FRONT ENGINE MOUNTING BRACKET RH


    1. A01XIRR

      Remove the 4 bolts and engine mounting bracket.

  24. REMOVE VACUUM PUMP OIL INLET HOSE

    Click here

  25. REMOVE UNION


    1. A01XEET

      Remove the union from the cylinder block.

  26. REMOVE VACUUM PUMP OIL OUTLET HOSE


    1. A01XD5P

      Remove the bolt, 2 gaskets and vacuum pump outlet hose.

  27. REMOVE NO. 1 FRONT ENGINE MOUNTING BRACKET LH


    1. A01XJIA

      Remove the 4 bolts and engine mounting bracket.

  28. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  29. REMOVE EXHAUST MANIFOLD

    Click here

  30. REMOVE OIL FILTER BRACKET SUB-ASSEMBLY

    Click here

  31. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

    Click here