ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE MANUAL TRANSMISSION ASSEMBLY


    1. Remove the manual transmission Click here.

  2. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  3. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  4. REMOVE FLYWHEEL SUB-ASSEMBLY

    Click here

  5. REMOVE REAR END PLATE

    Click here

  6. REMOVE FLYWHEEL HOUSING DUST SEAL

  7. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A01XHLFE04
      Text in Illustration
      *a Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Note

      After the removal, check that the crankshaft is not damaged. If damaged, repair it with a sandpaper (#400).

      Tech Tips

      Tape the screwdriver before use.