ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ УСТАНОВКА

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket and the engine coolant temperature sensor with the bolt.

      Torque:

      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

   2. Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL FRONT BUMPER LOWER COVER

   Click here

6. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here