КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ ДИЗЕЛЬНОГО ДВИГАТЕЛЯ ПРОВЕРКА

PROCEDURE

1. INSPECT DIESEL THROTTLE BODY

   
   

   1. Inspect the throttle control motor.

      
      
      1. 

         Text in Illustration

         *a	Component without harness connected (Diesel Throttle Body)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 18 to 22 Ω 2 - 3 20°C (68°F) 18 to 22 Ω 4 - 5 20°C (68°F) 18 to 22 Ω 5 - 6 20°C (68°F) 18 to 22 Ω

         If the result is not as specified, replace the diesel throttle body.

   2. Inspect the throttle open switch.

      
      
      1. 

         Text in Illustration

         *a	Component without harness connected (Diesel Throttle Body)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 Fully open Below 1 Ω 1 - 2 Fully close 10 kΩ or higher

         If the result is not as specified, replace the diesel throttle body.