| DTC Code | DTC Name |
|---|---|
| P0630 | VIN not Programmed or Mismatch - ECM / PCM |
DESCRIPTION
DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM, or the input VIN is incorrect. The VIN is input with the GTS.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0630 | Either condition is met (1 trip detection logic):
|
ECM |
CONFIRMATION DRIVING PATTERN
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Clear the DTCs (even if no DTCs are stored, perform the clear DTC operation).
Turn the ignition switch off and wait for at least 30 seconds.
Turn the ignition switch to ON and turn the GTS on.
Wait 5 seconds or more.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
Tech Tips
If a pending DTC is output, the system is malfunctioning.
If a pending DTC is not output, perform the following procedure.
Enter the following menus: Powertrain / Engine and ECT / Utility / All Readiness.
Input the DTC: P0630.
Check the DTC judgment result.
| GTS Display | Description |
|---|---|
| NORMAL |
|
| ABNORMAL |
|
| INCOMPLETE |
|
| N/A |
|
Tech Tips
If the judgment result shows NORMAL, the system is normal.
If the judgment result shows ABNORMAL, the system has a malfunction.
PROCEDURE
CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
If any DTCs other than P0630 are output, troubleshoot those DTCs first.
Note
If P0630 is stored, the VIN must be input to the ECM using the GTS. However, DTCs are cleared automatically by the GTS when the VIN is input. If DTCs other than P0630 are output, troubleshoot those DTCs first.
| B |
|
GO TO DTC CHART Click here |
| A |
|
INPUT VIN WITH GTS
Refer to the Registration Click here.
| NEXT |
|
END |