OUTER REAR VIEW MIRROR COVER (for TMMK Made) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE OUTER MIRROR


    1. B000NNCE01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Push the upper part of the mirror surface and tilt it.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.

    4. B000M59E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    5. Push the lower part of the mirror surface and tilt it.

    6. Using a moulding remover, disengage the 2 claws at the upper part of the outer mirror as shown in the illustration.

    7. Remove the outer mirror.

  2. REMOVE OUTER MIRROR COVER


    1. B000LF4

      Remove the 3 screws.

    2. B000KP0

      Disengage the clamp.

    3. Disconnect the connector and remove the mirror actuator.

    4. B000JGH

      Disengage the 7 claws and remove the outer mirror cover.