LUGGAGE COMPARTMENT DOOR (for TMMK Made) DISASSEMBLY


  1. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. B000HTS

      Remove the 13 clips and luggage compartment door cover.

  2. REMOVE LUGGAGE COMPARTMENT DOOR CUSHION


    1. B000LK8

      Disengage the 4 claws and remove the 4 luggage compartment door cushions.

  3. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. B000K42

      Remove the 2 clips.

    2. Disengage the clip and remove the luggage compartment door hinge cover LH.

  4. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. Disconnect the connector.

    2. B000MOL

      Remove the 2 bolts and disengage the luggage compartment door lock assembly.

    3. B000IQ5

      Disengage the claw as shown in the illustration.

    4. B000IEZ

      Disengage the luggage door lock control cable sub-assembly and remove the luggage compartment door lock assembly.

  6. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

    Tech Tips

    When removing the rear spoiler, heat the vehicle body and rear spoiler sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Spoiler Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body, rear spoiler sub-assembly excessively.


    1. B000IOE

      Apply protective tape around the rear spoiler sub-assembly as shown in the illustration.

      Text in Illustration
      B000JL5 Protective Tape
    2. B000NHT

      Remove the 2 nuts.

    3. Insert a piano wire between the vehicle body and rear spoiler sub-assembly.

      B000IC8E01
      Text in Illustration
      *a Wooden Block *b Piano Wire
      *c Double-sided Tape *d Clip
      *e Stud Bolt - -

    4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    5. Pull the piano wire and scrape off the double-sided tape that holds the rear spoiler sub-assembly to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    6. Disengage the 4 clips and remove the rear spoiler sub-assembly.

    7. Remove the 4 clips from the rear spoiler cover.

    8. Remove the 2 gaskets from the rear spoiler cover.

    9. Remove the 2 stud bolts from the rear spoiler cover.

  7. REMOVE REAR LIGHT ASSEMBLY LH


    1. B000I3A

      Disconnect the connector.

    2. Remove the 4 nuts and rear light assembly.

  8. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Disconnect the 2 connectors.

    2. B000NB0

      Remove the 6 nuts.

    3. B000KX6

      Apply protective tape around the luggage compartment door outside garnish sub-assembly as shown in the illustration.

      Text in Illustration
      B000JL5 Protective Tape
    4. B000I7D

      Disengage the 4 clips to remove the luggage compartment door outside garnish sub-assembly.

    5. Remove the 4 clips from the luggage compartment door outside garnish.

    6. Remove the 6 gaskets from the luggage compartment door outside garnish.

  10. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH


    1. B000HEB

      Disconnect the connector.

    2. Disengage the 2 claws and remove the license plate light assembly.

  11. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.