HOOD LOCK CONTROL CABLE ASSEMBLY (for TMC, TMMR Made) REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT WHEEL LH (for LHD)

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. REMOVE FRONT WHEEL RH (for RHD)

  6. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)


    1. for TMC, TMMR Made:


      1. B000JZM

        Remove the 3 screws and front wheel opening extension pad RH.

    2. for TMMK Made:


      1. B000LS7

        Remove the 3 screws and front wheel opening extension pad RH.

  7. REMOVE FRONT FENDER LINER RH (for RHD)


    1. for TMC, TMMR Made:


      1. B000KK5

        Remove the clip.

      2. B000HJXE01
        Text in Illustration
        *a 90°

        Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

      3. B000IYXE01
        Text in Illustration
        *1 Grommet

        Remove the 5 screws.

      4. Remove the 4 clips, 2 grommets and front fender liner RH.

        Tech Tips

        The grommets need to be replaced with new ones because they will break when they are removed.

    2. for TMMK Made:


      1. B000JK6

        Remove the clip.

      2. B000I9BE02
        Text in Illustration
        *a 90°

        Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

      3. B000KZOE02
        Text in Illustration
        *1 Grommet

        Remove the 5 screws and bolt.

      4. Remove the 4 clips, 3 grommets and front fender liner RH.

        Tech Tips

        The grommets need to be replaced with new ones because they will break when they are removed.

  8. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)


    1. B000N47

      Disengage the 10 claws and remove the front door scuff plate LH.

  9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)


    1. B000MCM

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  10. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  12. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B000H4N

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  13. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B000LYF

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  14. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. B000K66E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B000L2M

      Disconnect the connector.

    3. B000H1RE01
      Text in Illustration
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. B000H3Y

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  15. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. B000INQE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B000MZD

      Disconnect the connector.

    3. B000MRSE01
      Text in Illustration
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. B000M68

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  16. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, disengage the 5 clamps and hood cable grommet as shown in the illustration.

      B000KZXE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Hood Cable Grommet
      *3 Washer Hose *4 Hood Lock Control Cable Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

  17. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, disengage the 4 clamps and hood cable grommet as shown in the illustration.

      B000KSQE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Hood Cable Grommet
      *3 Washer Hose *4 Hood Lock Control Cable Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.