LUGGAGE DOOR HINGE TORSION BAR (for TMC, TMMR Made) REMOVAL

Note

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  2. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. Remove the baggage holder net.

  3. REMOVE REAR FLOOR FINISH PLATE


    1. B000KBF

      Remove the 5 clips.

    2. B000IEE

      Disengage the 4 clips and remove the rear floor finish plate.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B000J8TE01
      Text in Illustration
      *1 Pin

      Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.

  5. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. B000MUP

      Remove the 3 clips.

    2. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    1. B000MZ5

      Remove the 3 clips.

    2. Disengage the fastener and remove the luggage compartment inner trim cover RH.

  7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. B000IA0

      Disengage the 4 claws and remove the luggage compartment door hinge cover LH.

  8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. for Fold Down Seat Type:


      1. B000KW8E01

        Disengage the hook in the order indicated in the illustration and disconnect the rear seatback lock assembly LH (rear seat lock control cable LH).

        Tech Tips

        Use the same procedure as for the LH side and the RH side.

    2. B000J0WE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    3. B000IO7E01

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    4. B000J8W

      Disengage the 2 claws as shown in the illustration.

    5. B000LAO

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    6. B000KWH

      Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.

  10. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. B000NNSE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    2. B000NQ6E01

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. B000L6T

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    4. B000GZE

      Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.

  11. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. B000K86

      Remove the luggage compartment door torsion bar support as shown in the illustration.

      Note

      Make sure to replace the luggage compartment door torsion bar support with a new one.