LUGGAGE DOOR HINGE TORSION BAR (for TMMK Made) INSTALLATION

Note

After installing the luggage compartment door torsion bars, use your hand to open and close the luggage door. Make sure the luggage door opens and closes smoothly.


  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. B000M1G

      Install a new luggage compartment door torsion bar support as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. B000HJV

      Connect the luggage door hinge torsion bar LH to the left side luggage door hinge as shown in the illustration.

    2. B000JL8E01

      Using SST, install the luggage door hinge torsion bar LH to the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. B000NGO

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. B000KD8

      Connect the luggage door hinge torsion bar RH to the right side luggage door hinge as shown in the illustration.

    2. B000LU4E01

      Using SST, install the luggage door hinge torsion bar RH to the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. B000GZM

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support as shown in the illustration.

    4. B000J0K

      Engage the 2 claws as shown in the illustration.

  4. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Engage the clamp to install the No. 3 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 3 indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.

    2. Connect the connector.