POWER WINDOW MASTER SWITCH (for TMC, TMMR Made) INSPECTION


  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B000K8BE09
      Text in Illustration
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Multiplex Network Master Switch Assembly)
      *b LED

      Check that the LED illuminates.


      1. Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 18 (LED)

        Battery negative (-) → 12 (GND)

        		 LED illuminates

        If the result is not as specified, replace the multiplex network master switch assembly.