POWER WINDOW MASTER SWITCH (for TMC, TMMR Made) REMOVAL


  1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. B000MRM

      Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

    2. Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B000NI1

      Remove the 3 screws and multiplex network master switch assembly from the front upper armrest base panel.