POWER WINDOW MASTER SWITCH (for TMMK Made) REMOVAL


  1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. B000MJ9

      Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides.

    2. Disconnect each connector to remove the power window regulator master switch assembly with front door armrest base panel.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. B000HC2

      Remove the 3 screws.

    2. Disengage the guide and remove the power window regulator master switch assembly from the front upper armrest base panel.