REAR POWER WINDOW SWITCH (for TMMK Made) INSPECTION

INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH

1. 

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Switch Assembly (for Rear LH Door))

   Check the switch function.

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 2 - 7 Up Below 1 Ω 1 - 4 Up Below 1 Ω 3 - 7 Off Below 1 Ω 1 - 4 Off Below 1 Ω 3 - 7 Down Below 1 Ω 1 - 2 Down Below 1 Ω

      If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH door).

2. 

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Switch Assembly (for Rear LH Door))

   Check that the LED illuminates.

   
   

   1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

      OK
      Battery Connection Specified Condition Battery positive (+) → 6 Battery negative (-) → 5 LED illuminates

      If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH door).

INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH

1. 

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Switch Assembly (for Rear RH Door))

   Check the switch function.

   
   

   1. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 2 - 7 Up Below 1 Ω 1 - 4 Up Below 1 Ω 3 - 7 Off Below 1 Ω 1 - 4 Off Below 1 Ω 3 - 7 Down Below 1 Ω 1 - 2 Down Below 1 Ω

      If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH door).

2. 

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Switch Assembly (for Rear RH Door))

   Check that the LED illuminates.

   
   

   1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

      OK
      Battery Connection Specified Condition Battery positive (+) → 6 Battery negative (-) → 5 LED illuminates

      If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH door).