FRONT PASSENGER SIDE POWER WINDOW SWITCH (for TMMK Made) INSPECTION


  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. Check the switch function.


      1. B000KXEE01
        Text in Illustration
        *a

        Component without harness connected

        (Power Window Regulator Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 - 7 Auto up or manual up position Below 1 Ω
        4 - 7 Auto down or manual down position Below 1 Ω
        7 - 8 Auto up or auto down position Below 1 Ω
        4 - 5 Off Below 1 Ω

        If the result is not as specified, replace the power window regulator switch assembly.

    2. B000KXEE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly)

      Check that the LED illuminates.


      1. Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 1

        		 LED illuminates

        If the result is not as specified, replace the power window regulator switch assembly.