POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function(s) can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Power Window.

      5. Select the setting by referring to the table below.

        Tester Display Default Content Setting Relevant ECU
        Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU)
        P/W Up W/ Transmit OFF This function is used to close the windows using the wireless key transmitter. OFF/ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit OFF This function is used to open the windows using the wireless key transmitter. OFF/ON Main body ECU (Multiplex network body ECU)
        P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger door). Not Avl/Avail Power window ECU (Power window regulator motor assembly)
        P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly)
        RR Window Auto Up Avail This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH door). Not Avl/Avail Power window ECU (Power window regulator motor assembly)
        RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly)
        RL Window Auto Up Avail This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH door). Not Avl/Avail Power window ECU (Power window regulator motor assembly)
        RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly)

      6. Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.

      7. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        P/W Wireless Ope Buzz ON This function turns the wireless power window buzzer response on or off. OFF/ON Main body ECU (Multiplex network body ECU)