POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) OPERATION CHECK

CHECK AUTO UP / DOWN FUNCTION

1. Check that the driver door power window operates as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON	Driver door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)

2. Check that the front passenger door window and rear power windows operate as follows:

   OK

   Condition	Regulator Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch off	Front passenger door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)
   	Rear LH door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)
   	Rear RH door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)

CHECK REMOTE MANUAL UP / DOWN FUNCTION

1. Check that the front passenger door window and rear power windows operate as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch off	Front passenger door	Pulled halfway up	UP (Closes)
   		Pushed halfway down	DOWN (Opens)
   	Rear LH door	Pulled halfway up	UP (Closes)
   		Pushed halfway down	DOWN (Opens)
   	Rear RH door	Pulled halfway up	UP (Closes)
   		Pushed halfway down	DOWN (Opens)

CHECK REMOTE AUTO UP / DOWN FUNCTION

1. Check that the front passenger door window and rear power windows operate as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch off	Front passenger door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)
   	Rear LH door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)
   	Rear RH door	Pulled up (One touch operation)	AUTO UP (Closes)
   		Pushed down (One touch operation)	AUTO DOWN (Opens)

CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

1. Check that all the power windows can be operated with the multiplex network master switch assembly and power window regulator switch assemblies (for front passenger door, rear LH and RH doors) after the ignition switch is turned off.

   Tech Tips

   If the window lock switch is on, the power windows cannot be operated besides the driver door power window. Therefore, turn the window lock switch off before checking the window operation.

2. Check that the key-off operation function does not operate after the driver door or front passenger door is opened.

   Tech Tips

   Even if the driver door or passenger door is opened during automatic window operation while the key-off operation function is on, the window will continue operating.

3. Check that all the power windows cannot be operated after more than approximately 43 seconds have elapsed since the ignition switch was turned off.

CHECK KEY-LINKED FUNCTION USING DRIVER DOOR KEY CYLINDER*

• *: This function is set through the customize function, as it is off by default.

1. Check that all power windows operate as follows:

   OK

   Condition	Door Key Cylinder Operation	Power Window
   No key is inside vehicle, and all doors are closed	LOCK switch pressed and held for more than 1.5 seconds	UP (Closes)
   No key is inside vehicle, and all doors are closed	Returned to neutral position	STOP
   No key is inside vehicle, and all doors are closed	UNLOCK switch pressed and held for more than 1.5 seconds	DOWN (Opens)
   No key is inside vehicle, and all doors are closed	Returned to neutral position	STOP

CHECK WIRELESS TRANSMITTER-LINKED FUNCTION*

• *: This function is set through the customize function, as it is off by default.

1. Check that all power windows operate as follows when operating the transmitter:

   OK

   Condition	Transmitter Operation	Power Window
   No key is inside vehicle, and all doors are closed and locked	LOCK switch pressed for more than 2.4 seconds	UP (Closes)
   No key is inside vehicle, and all doors are closed and locked	LOCK switch released	STOP
   No key is inside vehicle, and all doors are closed and locked	UNLOCK switch pressed for more than 2.4 seconds	DOWN (Opens)
   No key is inside vehicle, and all doors are closed and locked	UNLOCK switch released	STOP

CHECK JAM PROTECTION FUNCTION

1. Check the basic function.

   CAUTION:

   Do not put your fingers between the door frame and door glass to check the jam protection function. Also, prevent any part of your body from being caught during inspection.

   Tech Tips

   The jam protection function operates during both the auto up and manual up operations while the engine is running or the ignition switch is ON, and also 43 seconds have elapsed after the ignition switch was turned off.

   
   

   1. Fully open the window.

   2. 

      Text in Illustration

      *1	Check Jig
      *2	Cloth

      Set a check jig wrapped with a piece of cloth near the window fully closed position.

   3. Operate the auto up or manual up function to check that the power window stops and goes down after the check jig is caught between the window and door frame, and stops when the opening reaches approximately 200 mm (7.87 in.) or until approximately 5 seconds elapse.

      Tech Tips

      If the check jig is caught when the opening is approximately 75 mm (2.95 in.) or more, the power window goes down for approximately 125 mm (4.93 in.) or until approximately 2.5 seconds elapse.

   4. While the power window is moving down, check that the door glass cannot be raised when the power window switch is used.

CHECK POWER WINDOW SWITCH LED ILLUMINATION