REAR POWER OUTLET SOCKET REMOVAL


  1. PRECAUTION (w/ Rear Seat Side Airbag)

    CAUTION:


    • Be sure to read Precaution thoroughly before servicing Click here.

    • If the side airbag has deployed, replace the rear seat airbag assembly, rear seatback frame subassembly, separate type rear seatback cover and separate type rear seatback pad with a new one.

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR SEAT HEADREST ASSEMBLY

  4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

  5. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. B000HUCE01

      Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Be sure to hold the part of the rear seat cushion assembly directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the rear seat cushion assembly may deform the rear seat cushion frame.

    2. Disconnect the 2 seat heater connectors.

    3. Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. B000LZB

      Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure as for the LH side.

  7. REMOVE REAR SEATBACK COVER


    1. B000HOH

      Disengage the 4 claws and remove the 2 rear seatback covers.

      Tech Tips

      Use the same procedure as for the LH side.

  8. REMOVE REAR SEATBACK ASSEMBLY LH


    1. w/ Rear Seat Side Airbag:


      1. Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.

    2. Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.

    3. B000HLQ

      Disengage the 2 hooks and disconnect the cover.

    4. Remove the 2 nuts, 2 bolts and rear seatback assembly LH.

  9. REMOVE REAR SEATBACK ASSEMBLY RH


    1. w/ Rear Seat Side Airbag:


      1. Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly RH.

    2. Disengage the rear seat belt from the rear seat shoulder belt guide.

    3. B000NM8

      Disengage the 2 hooks and disconnect the cover.

    4. Remove the 2 nuts, 2 bolts and rear seatback assembly RH.

  10. REMOVE CENTER SEATBACK ASSEMBLY


    1. Disconnect the connector.

    2. B000N2T

      Remove the 2 bolts.

    3. Disengage the hook and remove the center seatback assembly as shown in the illustration.

  11. REMOVE CENTER SEAT ARMREST INNER PLATE


    1. B000H1E

      Disengage the 6 claws and separate the 4 guides, and remove the center seat armrest inner plate.

  12. REMOVE REAR CENTER SEATBACK FRAME WITH COVER AND PAD


    1. B000LW3

      Remove the 2 nuts.

    2. Disengage the 2 claws and remove the rear center seatback frame with cover and pad.

  13. REMOVE CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY


    1. B000INO

      Disengage the 3 clamps.

    2. Remove the 2 bolts, 2 washers and center seat armrest bracket sub-assembly.

  14. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY


    1. B000HS8

      Disengage the 4 hooks and remove the rear seat center armrest box assembly from the rear seat center armrest.

  15. REMOVE COOLER CONTROL SWITCH ASSEMBLY


    1. B000MZ0

      Remove the 2 screws.

    2. Separate the guide and remove the rear seat center armrest door sub-assembly.

    3. B000NMF

      Remove the screw.

    4. Using a moulding remover, disengage the 8 claws and 3 guides, and remove the rear seat armrest plate.

    5. B000NAQ

      Disengage the 4 claws.

    6. B000N7D

      Disconnect each connector to remove the cooler control switch assembly.

  16. REMOVE REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY


    1. B000NQ8

      Disengage the guide.

    2. B000J0L

      Disengage the 3 clamps and turn back the rear seat center armrest cover as shown in the illustration.

    3. B000J1M

      Disconnect the connector.

    4. B000H7NE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the rear No. 1 power outlet socket assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  17. REMOVE REAR POWER OUTLET SOCKET COVER


    1. B000IC7

      Disengage the 2 claws and remove the rear power outlet socket cover as shown in the illustration.