POWER OUTLET SOCKET (for TMC, TMMR Made) INSTALLATION


  1. INSTALL NO. 2 POWER OUTLET SOCKET COVER (w/o Wireless Charger)


    1. B000M8M

      Engage the 2 claws to install the No. 2 power outlet socket cover as shown in the illustration.

  2. INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY (w/o Wireless Charger)


    1. B000HWQ

      As shown in the illustration, align the protrusion of the No. 2 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.

    2. Engage the 2 claws to install the No. 2 power outlet socket assembly to the No. 2 power outlet socket cover.

  3. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY (w/o Wireless Charger)


    1. Connect the 2 connectors.

    2. Engage the clamp.

    3. B000MYF

      Engage the 2 guides and 4 clips as shown in the illustration.

    4. Install the upper console box sub-assembly with the 2 screws.

  4. INSTALL NO. 1 POWER OUTLET SOCKET COVER (w/ Wireless Charger)


    1. B000MWL

      Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration.

  5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Wireless Charger)


    1. B000LQL

      Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.

  6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY (w/ Wireless Charger)


    1. Connect each connector.

    2. B000JWH

      Engage the 2 clips.

    3. Install the front ash receptacle assembly with the 2 screws <D>.

  7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/ Wireless Charger)


    1. for Blank Type:


      1. B000HOA

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. Connect each connector.

      2. B000N2U

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

  8. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. B000JVU

      Engage the 6 clips to install the rear console upper panel sub-assembly.

    3. Move the shift lever to P.

  9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. B000IUA

      Turn the shift lever knob sub-assembly clockwise to install it.

    2. B000JBW

      Engage the 2 claws to connect the shift hole cover sub-assembly as shown in the illustration.

  10. INSTALL FRONT PANEL GARNISH RH


    1. B000KNC

      Engage the 3 clips and 8 guides to install the front panel garnish RH.

  11. INSTALL FRONT PANEL GARNISH LH


    1. B000N75

      Engage the 3 clips and 8 guides to install the front panel garnish LH.