AIR CONDITIONING AMPLIFIER (for TMC, TMMR Made) REMOVAL


  1. PRECAUTION (for LHD)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for LHD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  6. REMOVE INSTRUMENT SIDE PANEL

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  7. REMOVE FRONT PANEL GARNISH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. B000LGW

      Disengage the 4 claws.

    2. Disengage the 2 guides.

    3. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.

  9. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. B000M27

      Remove the bolt <B> and screw <D>.

    2. Open the lower instrument panel door.

    3. B000NBB

      Remove the 3 screws <D>.

    4. B000ILS

      Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.

  10. REMOVE ECU INTEGRATION BOX RH (for LHD)

    w/ ECU Integration Box RH: Click here

  11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    1. Disconnect each connector.

    2. for LHD:


      1. B000MQ7

        Remove the 2 screws.

      2. Disengage the 2 guides and remove the air conditioning amplifier assembly.

    3. for RHD:


      1. B000HGR

        Remove the 2 screws.

      2. Disengage the 2 guides and remove the air conditioning amplifier assembly.