Tech Tips
Use this procedure to troubleshoot the rear sunshade system.
*: Use the intelligent tester.
VEHICLE BROUGHT TO WORKSHOP
| NEXT |
|
CUSTOMER PROBLEM ANALYSIS
Tech Tips
In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
The following 5 items are important points in the problem analysis:
| What | Vehicle, system name |
| When | Date, time, occurrence frequency |
| Where | Road conditions |
| Under what conditions? | Driving conditions, weather conditions |
| How did it happen? | Problem symptoms |
| NEXT |
|
INSPECT BATTERY VOLTAGE
Measure the battery voltage.
| Standard Voltage |
|---|
| 11 to 14 V |
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| NEXT |
|
INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
Using the intelligent tester, check if the CAN communication system is functioning normally Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| A |
|
PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table Click here.
| Result | Proceed to |
|---|---|
| Fault not listed in problem symptoms table | A |
| Fault listed in problem symptoms table | B |
| B |
|
Go to step 7 |
| A |
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
Terminals of ECU Click here
Operation Check Click here
Data List / Active Test Click here
| NEXT |
|
REPAIR OR REPLACE
| NEXT |
|
CONFIRMATION TEST
| NEXT |
|
| END |