SOLAR SENSOR (for TMC, TMMR Made) REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. B000MRZ

      Using a moulding remover, pry up on the center instrument cluster finish panel sub-assembly until there is enough of a gap to make it possible to pull on the panel by hand.

    2. B000LY7

      Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 7 clips and 2 guides to remove the center instrument cluster finish panel sub-assembly as shown in the illustration.

  2. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. B000KSW

      Disengage the 6 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 1 speaker opening cover assembly.

  3. REMOVE SOLAR SENSOR (AUTOMATIC LIGHT CONTROL SENSOR)


    1. B000JDD

      Disengage the 2 claws and remove the solar sensor (automatic light control sensor).