FRONT EVAPORATOR TEMPERATURE SENSOR (for TMC, TMMR Made) REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    1. B000JWO

      Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.

  3. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    1. B000JUQ

      Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.

  4. DISCONNECT AIR CONDITIONING HARNESS ASSEMBLY


    1. B000J8K

      Remove the heater packing as shown in the illustration.

    2. B000JE6

      Disconnect the 3 connectors and disengage the 3 guides.

    3. Disconnect the air conditioner harness assembly from the air conditioning unit.

  5. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY


    1. B000IMD

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the air conditioning radiator assembly.

  6. REMOVE COOLER EXPANSION VALVE


    1. B000HRY

      Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.

  7. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    1. B000K31

      Remove the 6 screws.

    2. Disengage the 5 claws and remove the plate cover.

    3. B000HEW

      Disengage the clamp and remove the No. 1 cooler evaporator sub-assembly with the No. 1 cooler thermistor.

    4. B000MMH

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

  8. REMOVE NO. 1 COOLER THERMISTOR


    1. B000IBD

      Remove the No. 1 cooler thermistor.