ROOM TEMPERATURE SENSOR (for TMC, TMMR Made) INSTALLATION


  1. INSTALL ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. Connect the connector and cooler thermistor hose.

    2. B000M9O

      Engage the 2 claws to install the room temperature sensor (cooler thermistor) as shown in the illustration.

  2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY


    1. w/o Driver Side Knee Airbag:


      1. Engage the 5 clips and 3 guides.

    2. w/ Driver Side Knee Airbag:


      1. Engage the 4 claws, 7 clips and 3 guides.

    3. Install the instrument panel sub-assembly with the 2 bolts <B>.

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  4. INSTALL FRONT PANEL GARNISH


    1. B000N75

      Engage the 3 clips and 8 guides to install the front panel garnish LH.

  5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)


    1. w/ Smart Entry and Start System:


      1. Connect the connector.

    2. B000J2O

      Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.

  6. INSTALL INSTRUMENT SIDE PANEL


    1. Engage the 3 guides.

    2. B000N7A

      Engage the 4 claws to install the instrument side panel LH as shown in the illustration.

  7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

    for LHD: Click here

    for RHD: Click here

  8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY


    1. Engage the 2 clips.

    2. Install the cowl side trim sub-assembly LH with the clip.

  9. INSTALL FRONT DOOR SCUFF PLATE


    1. Engage the 10 claws to install the front door scuff plate LH.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for RHD with Smart Entry and Start System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.