ROOM TEMPERATURE SENSOR (for TMMK Made) REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. B000JR7E01

      Disengage the 2 claws (A) in the direction indicated by the arrows (1) shown in the illustration.

    2. Disengage the 2 claws (B) in the direction indicated by the arrows (2) shown in the illustration.

    3. Disengage the 6 claws (C) to remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. B000MCM

      Remove the clip.

    2. Pull the cowl side trim sub-assembly LH as shown in the illustration to disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B000KDO

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH


    1. B000H81

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. B000IQ4

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B000H4N

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. B000M0W

      Remove the bolt <B> and screw <C> or <D>.

    2. B000HTR

      Disengage the 4 claws, 9 clips and 3 guides to remove the lower No. 1 instrument panel finish panel assembly.

  7. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. B000LRH

      Disengage the 2 claws as shown in the illustration.

    2. Disconnect the cooler thermistor hose and connector, and remove the room temperature sensor (cooler thermistor).