AIR CONDITIONING PANEL (for TMC, TMMR Made) INSTALLATION


  1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Engage the 4 clips to install the air conditioning control assembly.

  2. INSTALL NO. 1 RADIO BRACKET (w/o Radio Receiver)


    1. Engage the claw to temporarily install the radio tuner opening cover.

    2. Install the No. 1 radio bracket with the 3 screws.

  3. INSTALL NO. 2 RADIO BRACKET (w/o Radio Receiver)


    1. Engage the claw.

    2. Install the No. 2 radio bracket and radio tuner opening cover with the 3 screws.

  4. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)


    1. w/o Navigation System:


      1. Install the No. 1 radio bracket with the 4 screws.

    2. w/ Navigation System:


      1. Install the No. 1 radio bracket with the 6 screws.

  5. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)


    1. w/o Navigation System:


      1. Install the No. 2 radio bracket with the 4 screws.

    2. w/ Navigation System:


      1. Install the No. 2 radio bracket with the 6 screws.

  6. INSTALL NO. 1 RADIO BRACKET (for Navigation Receiver Type)


    1. Install the No. 1 radio bracket with the 4 screws.

  7. INSTALL NO. 2 RADIO BRACKET (for Navigation Receiver Type)


    1. Install the No. 2 radio bracket with the 4 screws.

  8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Radio Receiver)


    1. Connect the connector.

    2. Engage the 6 clips.

    3. Install the center instrument cluster finish panel with air conditioning control assembly with the 4 bolts <C>.

  9. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)


    1. Connect each connector.

    2. Engage the 6 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

    3. Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.

  10. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type)


    1. Connect each connector.

    2. Engage the 6 clips to the vehicle body to temporarily install the navigation receiver assembly with air conditioning control assembly.

    3. Install the navigation receiver assembly with air conditioning control assembly with the 4 bolts.

  11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. for Blank Type:


      1. B000HOA

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. Connect each connector.

      2. B000N2U

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

  12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. B000LVO

      Engage the 4 clips to install the No. 2 instrument panel register assembly.

      Note

      When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

  13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. B000NS6

      Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.

  14. INSTALL FRONT PANEL GARNISH RH


    1. B000KNC

      Engage the 3 clips and 8 guides to install the front panel garnish RH.

  15. INSTALL FRONT PANEL GARNISH LH


    1. B000N75

      Engage the 3 clips and 8 guides to install the front panel garnish LH.

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.