BLOWER UNIT (for TMMK Made) REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    1. B000JWO

      Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.

  3. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    1. B000JUQ

      Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.

  4. REMOVE AIR CONDITIONING HARNESS ASSEMBLY


    1. B000I37

      Remove the heater packing as shown in the illustration.

    2. B000J55

      Disconnect the 5 connectors.

    3. Disengage the 5 clamps and remove the air conditioning harness assembly.

  5. REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY


    1. B000KZP

      Remove the 6 screws.

    2. Disengage the 4 claws and remove the blower assembly with cooler evaporator sub-assembly.