CHILD RESTRAINT SEAT TETHER ANCHOR (for TMC, TMMR Made) INSTALLATION

INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

INSTALL REAR SEAT SHOULDER BELT COVER

INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

INSTALL ROOF SIDE INNER GARNISH LH

1. Engage the guide.

2. Engage the 5 clips to install the roof side inner garnish LH.

CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

1. 

   Text in Illustration

   *1	Protruding Part

   Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.

   Torque:

   42 N*m  { 428 kgf*cm, 31 ft.*lbf }

   Note

   
   

   • Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.

   • Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.

INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

1. Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

CONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side)

1. 

   Text in Illustration

   *a	Protruding Part

   Connect the floor anchor of the rear seat outer belt assembly with the bolt.

   Torque:

   42 N*m  { 428 kgf*cm, 31 ft.*lbf }

   Note

   Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding parts of the floor panel.

CONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side)

1. 

   Text in Illustration

   *a	Protruding Part

   Connect the floor anchor of the rear seat outer belt assembly with the bolt.

   Torque:

   42 N*m  { 428 kgf*cm, 31 ft.*lbf }

   Note

   Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding parts of the floor panel.

INSTALL REAR SEAT SIDE GARNISH LH (for Reclining Seat Type)

1. Engage the guide, claw and 2 clips.

2. Install the rear seat side garnish LH with the bolt.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

1. 

   Text in Illustration

   *1	Alignment Mark (Red)

   Align the alignment mark (Red) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.

   Note

   After installation, check that the corners fit correctly.

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

1. 

   Text in Illustration

   *1	Alignment Mark (Blue)

   Align the alignment mark (Blue) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

   Note

   After installation, check that the corners fit correctly.

INSTALL REAR DOOR SCUFF PLATE LH (for Reclining Seat Type)

1. Engage the 6 claws to install the rear door scuff plate LH.

   Tech Tips

   Engage the claws from the rear side of the scuff plate.

INSTALL CENTER SEATBACK ASSEMBLY (for Reclining Seat Type)

1. Place the center seatback assembly in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Engage the hook.

3. Install the center seatback assembly with the 2 bolts.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

4. Connect the connector.

INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)

1. Place the rear seatback assembly LH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Install the rear seatback assembly LH with the 2 bolts and 2 nuts.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

3. Engage the 2 hooks to install the cover.

4. Connect the 2 rear seat belts to the 2 rear seat shoulder belt guides.

5. w/ Rear Seat Side Airbag:

   
   

   1. Connect each connector and clamp to the child restraint anchor bracket sub-assembly LH.

INSTALL REAR SEATBACK COVER (for Reclining Seat Type)

1. Engage the 4 claws to install the 2 rear seatback covers.

   Tech Tips

   Use the same procedure as for the LH side.

INSTALL REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type)

1. Place the rear seatback assembly RH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Install the rear seatback assembly RH with the 2 bolts and 2 nuts.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

3. Engage the 2 hooks to install the cover.

4. Connect the rear seat belt to the rear seat shoulder belt guide.

5. w/ Rear Seat Side Airbag:

   
   

   1. Connect each connector and clamp to the child restraint anchor bracket sub-assembly RH.

INSTALL REAR SEATBACK COVER (for Reclining Seat Type)

1. Engage the 4 claws to install the 2 rear seatback covers.

   Tech Tips

   Use the same procedure as for the LH side.

INSTALL REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)

INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)

INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

1. Place the rear side seatback assembly LH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Engage the hook to install the rear side seatback assembly LH with the bolt.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

3. Connect the rear seat outer belt assembly to the rear seat shoulder belt guide LH.

INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)

1. Place the rear side seatback assembly RH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Engage the hook to install the rear side seatback assembly RH with the bolt.

   Torque:

   18 N*m  { 184 kgf*cm, 13 ft.*lbf }

3. Connect the rear seat outer belt assembly to the rear seat shoulder belt guide RH.

INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

INSTALL REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type)