SEAT BELT WARNING SYSTEM (w/o Occupant Classification System) ON-VEHICLE INSPECTION


  1. INSPECT SEAT BELT WARNING SYSTEM


    1. Turn the ignition switch to ON.

    2. When the driver seat belt is not fastened, check that the seat belt warning light on the combination meter assembly blinks.

    3. Lift up the vehicle using a swing arm type lift Click here.

    4. Start the engine.

    5. When the driver seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the seat belt warning light on the combination meter assembly blinks at an interval of 1.2 seconds for 30 seconds.

      After that, check that the seat belt warning light on the combination meter assembly blinks at an interval of 0.4 seconds.

    6. When the driver seat belt is fastened, check that the seat belt warning light on the combination meter assembly turns off.

  2. INSPECT SEAT BELT WARNING BUZZER

    Tech Tips

    The seat belt warning buzzer can be customized. Make sure that this function is ON Click here.


    1. Lift up the vehicle using a swing arm type lift Click here.

    2. Start the engine.

    3. When the driver seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds.

      After that, check that the buzzer sounds at an interval of 0.4 seconds for 90 seconds.

    4. Check that the buzzer stops 2 minutes after the it starts sounding.

    5. After the buzzer has stopped, turn the ignition switch off and then start the engine again. Drive the vehicle at approximately 20 km/h (12 mph) or more while the driver seat belt is not fastened, and check that the buzzer sounds again.

    6. After the buzzer has stopped, fasten the driver seat belt. Drive the vehicle at approximately 20 km/h (12 mph) or more and unfasten the driver seat belt, and check that the buzzer sounds again.

    7. After the buzzer has stopped, stop the vehicle, move the shift lever to R, and then move it to D. Drive the vehicle at approximately 20 km/h (12 mph) or more, and check that the buzzer sounds again.