OCCUPANT DETECTION SENSOR INSTALLATION

Note

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. B000J9L

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 18 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. B000LBP

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  3. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. w/o Seat Belt Warning System:


      1. B000KAQE02
        Text in Illustration
        *a Protruding Part

        Install the front seat inner belt assembly with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    2. w/ Seat Belt Warning System:


      1. B000GWSE03
        Text in Illustration
        *a Protruding Part

        Install the front seat inner belt assembly with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

      2. Engage each clamp under the front seat assembly.

      3. Connect the connector under the front seat assembly.

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  5. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  6. INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  8. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  10. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat Click here.