OCCUPANT DETECTION SENSOR REMOVAL

Note

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  6. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. w/o Seat Belt Warning System:


      1. B000KTS

        Remove the nut and front seat inner belt assembly.

    2. w/ Seat Belt Warning System:


      1. Disconnect the connector under the front seat assembly.

      2. Disengage each clamp under the front seat assembly.

      3. B000KBJ

        Remove the nut and front seat inner belt assembly.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  10. REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. B000JMO

      Remove the 2 hog rings.

    2. B000M5G

      Remove the 18 hog rings and occupant detection sensor (separate type front seat cushion pad) from the separate type front seat cushion cover.