FRONT SEAT CUSHION HEATER (for TMC, TMMR Made Power Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000N4Z

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. B000I9F

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. for Front Passenger Side without Occupant Classification System:


      1. Engage the claw to install the connector.

      2. Connect the connector.

    4. w/ Seat Heater System:


      1. Engage the 2 clamps to install the seat heater wire harness.

      2. Connect the connector.

      3. Engage the clamp.

      4. Connect the connector.

    5. Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.

    6. Engage the fastener to secure the front seat airbag assembly wire harness.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. Engage the 5 claws and 6 guides to install the front seat inner cushion shield.

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. Engage the 5 claws and 7 guides to install the front seat inner cushion shield.

  5. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  6. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  7. INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. B000J1I

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    2. B000I12

      Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.

    3. Install the screw.

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the rubber band of the separate type front seatback cover.

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here