FRONT SEAT CUSHION HEATER (for TMC, TMMR Made Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000HL3

      Disconnect the rubber band of the separate type front seatback cover.

  3. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. B000KCL

      Remove the screw.

    2. Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.

    3. B000KY8

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

  4. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. B000M7P

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. B000J8VE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. B000K56

      Disconnect the front lumbar power seat switch connector.

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. B000JIW

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. B000JHCE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. B000KSR

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. B000KDK

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B000HO6

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. B000NIE

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. B000LLI

        Disconnect the connector.

      2. Disengage the clamp.

      3. B000MFT

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. for Front Passenger Side without Occupant Classification System:


      1. B000K6L

        Disconnect the connector.

      2. B000LDT

        Disengage the claw to separate the connector.

    5. B000LSN

      Disengage the hook.

    6. B000J0N

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000IM8

      Remove the 2 hog rings.

    2. B000IY9

      Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.