FRONT SEAT CUSHION HEATER (for TMC, TMMR Made Manual Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. B000MZ9E03
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. B000LQ2

      Remove the screw and vertical adjusting handle.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000L03

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. B000MA0

      Remove the screw.

    2. Disengage the 5 claws, 6 guides and clip to remove the front seat cushion shield.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. B000LPZ

      Remove the screw.

    2. Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. B000KSR

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. B000KDK

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B000KDD

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. B000L41

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. B000LLI

      Disconnect the connector.

    4. Disengage the clamp.

    5. B000MFT

      Disconnect the connector.

    6. Disengage the 2 clamps to separate the seat heater wire harness.

    7. B000HI5

      Disengage the hook.

    8. B000NHS

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000IM8

      Remove the 2 hog rings.

    2. B000IY9

      Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.