FRONT SEAT CUSHION HEATER (for TMMK Made) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY


    1. B000K9Z

      Using a tacker, install the front seat cushion heater assembly to the separate type front seat cushion cover with 22 new tag pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000H5H

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 12 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. for Driver Side:


      1. B000NSA

        Install the separate type front seat cushion cover.

    4. for Front Passenger Side:


      1. B000KKQ

        Install the separate type front seat cushion cover.

    5. B000LDVE01

      Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

    6. Engage the clamp (B).

    7. Connect the connector (A).

    8. w/ Seat Heater System:


      1. Connect the connector (E).

      2. Engage the clamp (F).

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. Install the front seat inner cushion shield with the 2 screws.

      Torque:
      0.6 N*m  { 6 kgf*cm, 5 in.*lbf }

  5. INSTALL FRONT POWER SEAT SWITCH

    Click here