FRONT SEAT CUSHION HEATER (for TMMK Made) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT POWER SEAT SWITCH

    Click here

  2. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. B000HK0

      Remove the 2 screws and front seat inner cushion shield.

  3. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B000LDVE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

    5. for Driver Side:


      1. B000NSA

        Separate the separate type front seat cushion cover.

    6. for Front Passenger Side:


      1. B000KKQ

        Separate the separate type front seat cushion cover.

    7. B000JQU

      Disengage the 4 hooks.

    8. B000LG4

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  4. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000MPT

      Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  5. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY


    1. B000K9Z

      Remove the 22 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.