REAR SEATBACK HEATER (for Fold Down Seat Type) INSTALLATION


  1. INSTALL SEPARATE TYPE REAR SEATBACK COVER (REAR SEATBACK HEATER SUB-ASSEMBLY) (for LH Side)


    1. B000M04

      Using hog ring pliers, install the separate type rear seatback cover (rear seatback heater sub-assembly) with 6 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover (rear seatback heater sub-assembly).

  2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.

    2. B000M49

      Engage the 4 claws to install the 2 rear seat headrest supports.

    3. B000N50

      Engage the 2 hooks.

    4. B000LN3

      Using hog ring pliers, install 6 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

    5. B000M6X

      Engage the 2 hooks to install the separate type rear seatback cover with pad.

  3. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side)


    1. B000LFE

      Engage the 4 claws to install the rear seatback upper lock bezel.

  4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side)


    1. B000HWB

      Engage the guide.

    2. Install the rear seat center shoulder belt guide with the 2 screws.

  5. INSTALL SEPARATE TYPE REAR SEATBACK COVER (REAR SEATBACK HEATER SUB-ASSEMBLY) (for RH Side)


    1. B000LLG

      Using hog ring pliers, install the separate type rear seatback cover (rear seatback heater sub-assembly) to the separate type rear seatback pad with 8 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover (rear seatback heater sub-assembly).

    2. B000IBW

      Using hog ring pliers, install 7 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover (rear seatback heater sub-assembly).

  6. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)


    1. Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.

    2. B000NC9

      Engage the 4 claws to install the 2 front seat headrest supports.

    3. B000M1J

      Engage the 2 hooks.

    4. B000N7K

      Using hog ring pliers, install the rear separate type seatback cover with pad to the seatback frame with 7 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

    5. B000JAQ

      Engage the 2 hooks to install the separate type rear seatback cover with pad.

  7. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side)


    1. B000NQW

      Engage the 4 claws to install the rear seatback upper lock bezel.

  8. INSTALL REAR SEATBACK HINGE COVER (for RH Side)


    1. B000GYZ

      Install the rear seatback hinge cover as shown in the illustration.

  9. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)


    1. B000I93

      Engage the 2 claws to install the bush.

    2. B000HDM

      Engage the guide.

    3. Install the rear seat center armrest assembly with the bolt and washer.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  10. INSTALL NO. 1 SEAT ARMREST CAP (for RH Side)


    1. B000I07

      Engage the 3 claws to install the No. 1 seat armrest cap.

  11. INSTALL REAR SEATBACK ASSEMBLY LH


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. w/ Seat Heater System:


      1. Engage the clamp.

      2. Connect the connector.

    3. Install the rear seatback assembly LH with the 2 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    4. B000I0G

      Engage the fastener as shown in the illustration.

    5. Raise the rear seatback assembly LH.

    6. Connect the rear seat outer belt assembly to the rear seat center shoulder belt guide.

  12. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. w/ Seat Heater System:


      1. Engage the clamp.

      2. Connect the connector.

    3. Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    4. B000JB7

      Engage the fastener as shown in the illustration.

    5. Raise the rear seatback assembly RH.

  13. INSTALL REAR SEAT HEADREST ASSEMBLY