CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
REMOVE FRONT SEAT ASSEMBLY
REMOVE RECLINING ADJUSTER RELEASE HANDLE
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)
Remove the screw and vertical adjusting handle.
DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Disconnect the rubber band of the separate type front seatback cover.
REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)
Remove the screw.
Disengage the 5 claws, 6 guides and clip to remove the front seat cushion shield.
REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
Remove the screw.
Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.
REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Disconnect the connector.
Disengage the clamp.
Remove the 5 hog rings.
Remove the 3 hog rings.
Remove the 2 hog rings.
Turn back the separate type front seatback cover.
Remove the nut and the 2 brackets.
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.