FRONT SEATBACK HEATER (for TMMK Made) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000L7Q

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  3. DISCONNECT CONNECTORS


    1. B000LDVE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. Disconnect the connector (E).

    5. Disengage the clamp (F).

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. B000L70

      Disengage the hook.

    2. B000HT4

      Disengage the 2 fasteners.

    3. B000JIM

      Turn back the separate type front seatback cover.

    4. B000HNP

      Disengage the 2 hooks.

    5. B000L5U

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. B000NMJ

      Remove the separate type front seatback cover with pad.

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B000I8L

      Remove the 2 hog rings.

    2. Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.

  6. REMOVE FRONT SEATBACK HEATER ASSEMBLY


    1. B000MC2

      Remove the 8 tag pins and the front seatback heater assembly from the separate type front seatback cover.