LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. Install the 2 front seatback hooks to the lumbar support adjuster assembly.

    2. B000K72

      Engage the 2 guides.

    3. Engage the 4 claws to install the lumbar support adjuster assembly.

    4. Connect the connector.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Engage the 2 hooks.

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after engage the 2 hooks.

      • Engage the 2 hooks securely.

    4. Turn back the separate type front seatback cover.

    5. Engage the 2 fasteners.

    6. Engage the hook.

  3. CONNECT CONNECTORS


    1. B000LDVE01

      Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

    2. Engage the clamp (B).

    3. Connect the connector (A).

    4. Connect the connector (E).

    5. Engage the clamp (F).

  4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the 2 rubber bands of the separate type front seatback cover.

  5. INSTALL FRONT SEAT ASSEMBLY LH

    Click here