RELAY ON-VEHICLE INSPECTION


  1. INSPECT SEAT HEATER R/L RELAY


    1. B000JCW

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
      3 - 5 Battery voltage not applied between terminals 10 kΩ or higher

      If the result is not as specified, replace the seat heater relay LH.

  2. REMOVE SEAT HEATER R/R RELAY


    1. B000JCW

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
      3 - 5 Battery voltage not applied between terminals 10 kΩ or higher

      If the result is not as specified, replace the seat heater relay RH.